Here at SPC we offer the opportunity to become the proud owner of one of our Bespoke Control Boxes. 
All boxes are unique to your track design and overall appearance .

We do 4 different stages of Panels/Boxes 
1. The aluminium composite panel with your printed track plan on and sealed via lamination.
2. The aluminium composite panel with your printed track plan on and sealed via lamination with frame and fully wired up using our SPC two-wire system ready to connect to your layout*
3. The aluminium composite panel with your printed track plan on and sealed via lamination with full frame and storage box.
4. The aluminium composite panel with your printed track plan on and sealed via lamination with full frame and storage box, fully wired using the SPC two-wire system ready to connect to your layout*

Composite panel is made of Aluminium, perspex, aluminium with a white insulated coat on both sides to prevent any electrical shorts.

All panel sizes will vary dependant on your layout and what wiring space would be required on the other side of the panel. 
All fully wired panels are not wired within the box but the frame of the panel itself. 
We create the frame and boxes out of OAK as we believe it gives the best finish. However we are able to use other materials. If you wish to have a box made out of another material please discuss this with us during your enquiry. 

All storage box space is to a depth of your choice.

To quote on any of the options 1 to 4 we would need to receive a rough track plan from yourself with mention of any points, slips and crossings etc. 
All panels are able to be used with DC and DCC.

* We only use a two-wire system, however if you wish to wire it using the three-wire system we can supply option 1 or 3 for you, ready for you to wire it yourself.